Coverage data according to F1/16 (procedure 700, 1500, 2100 MHz) and F7/16 (procedure 3600 MHz) are published according to the following interface definition:
Coverage data is provided as CSV file with the seperator ";" (semicolon) using the following structure:
operator;reference;license;rfc_date;raster;dl_normal;ul_normal;dl_max;ul_max
LIWEST;F7/16;CCBY4.0;2020-12-26;100mN27285E48011;55000000;22000000;250000000;49000000
o “A1TA” for A1 Telekom Austria AG
o “TMA”: for T-Mobile Austria GmbH
o “H3A”: for Hutchison Drei Austria GmbH
o “LIWEST” for LIWEST Kabelmedien GmbH
o “SBG” for Salzburg AG für Energie, Verkehr und Telekommunikation
o “HGRAZ” for Holding Graz - Kommunale Dienstleistungen GmbH
o “MASS” for MASS Response Service GmbH
o “F7/16” for data according to the obligation according to decision F7/16
o "F1/16" for data according to the obligation according to decision F1/16
“CCBY4.0”; data is published according to this license
date in format of RFC 3399 (only day, no daytime); The date refers to the point of time when the simulation was done. This point of time is typically earlier than the date of publication.
Example: “2020-12-26”
Raster according to the nomenclature of ETRS-LAEA-data
Example: “100mN27285E48011”
Downlink - normally available end user downlink data rate outdoors. This data rate is provided as integer (no decimals) in Bit/s (no multiples. If no coverage is available in that raster, the value of 0 is used.
Uplink - - normally available end user uplink data rate outdoors. This data rate is provided as integer (no decimals) in Bit/s (no multiples. If no coverage is available in that raster, the value of 0 is used.
Downlink - estimated maximum end user downlink data rate outdoors. This data rate is provided as integer (no decimals) in Bit/s (no multiples. If no coverage is available in that raster, the value of 0 is used.
Uplink - estimated maximum end user uplink data rate outdoors. This data rate is provided as integer (no decimals) in Bit/s (no multiples. If no coverage is available in that raster, the value of 0 is used.